PT Pumps, T

Tel./fax.:	+380 (542)63-53-28
Cell:	+380 (99)116-06-80 +380 (68)923-77-76
E-mail:	snm-2008@ukr.net snmmash@gmail.com
Skype:	Soyuznasosmash Equipment

Purpose
Three-plunger crankshaft units and pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part, with kinematic viscosity not exceeding 800 mm²/s (8 Stokes) and temperatures depending on the design, from 243 K to 473 K (from -30 to +200 °C).
Permissible content of solid non-abrasive particles in the pumped liquid is no more than 0.2% by weight, and allowable particle size no more than 0.2 mm.
These pumps and units are used in industries requiring high pressures, including explosive and fire hazardous environments (for example, hydraulic cleaning of process equipment). They are also used as feed pumps for mobile steam generating installations.

Design
A three-plunger crankshaft unit consists of an electric motor and pump mounted on a common frame. Pumps can be driven by electric motors, internal combustion engines, or diesel engines. The connection between the pump and electric motor can be made via V-belt drive, gearbox, or directly through a coupling.
The three-plunger pump consists of a drive part and a hydraulic part. The drive part contains a crankshaft to convert the rotational motion of the engine into the reciprocating motion of the plungers.
The hydraulic part consists of a hydraulic block, plungers, stuffing box seals, suction and discharge valves, and a safety valve. The safety valve is set to nominal working pressure but can be adjusted if needed. Units can be connected to devices regulating the engine’s rotational speed.

Designation
Example of unit designation:
2.3 PT-1/40 D1-A3-U3 TU U 29.1-38136281-005:2012

Where:

3 — pump size based on loads on working parts, speed, and drive part size (options: 1.1; 1.2; 1.3; 2.3);
PT — type of unit by drive part design (with built-in gearbox — T; without built-in gearbox — PT);
1 — unit flow rate, m³/h;
40 — pressure at pump outlet, MPa;
D — pump hydraulic part material (chromium steels like 20X13 or 40X13 — D; chromium-nickel steels like 12X18H10T — K);
1 — hydraulic part design (without cooling/heating hydraulic part with lubrication or cooling fluid supply to seal — 1; without cooling/heating with lubrication, cooling, flushing, or hydraulic seal fluid supply — 2; with cooling/heating and supply to seals of lubricating, flushing, cooling, or hydraulic seal fluid — 4);
A — unit version by electric motor explosion protection (general industrial motor — A; explosion-proof motor — V);
3 — connection method between pump and motor (via V-belt — 1; via gearbox — 2; direct coupling — 3);
U — climatic version (U, T, UHL);
3 — placement category (2, 3, 4);
TU U 29.1-38136281-005:2012 — technical specification number.

Based on PT and T pumps, UN, UPG, and UPGD installations are manufactured.

Pump (unit, installation) sizes, flow rate, pressure, and specifications table
(Followed by detailed data tables specifying model, flow rate m³/h, pressure MPa, version, motor speed rpm, power kW, and weight kg.)

Performance Specifications (Nominal Conditions)

Conditions:

Liquid density: 1000 kg/m³
Temperature: up to 303 K (30°C)
Shaft speeds: 1500 or 1000 RPM

standard size pump (unit installation)	Supply м³/h	pressure on exit pump, MPa	Performance	Engine n, r/min	Engine KW N	weight*, kg
1.1PT-0,16/2,5	0,16	2,5	D1-А1, D1-В1	970	0,37	135
1.1PT-12	0,32-0,50	40	D2	-	-	105
1.1PT-16	0,5-1,0	20	D1	-	-	100
1.1PT-0,8/16	0,8	16	D1-D3	730	5,5	300
1.1PT-25	1,25-2,50	8	D1	-	-	100
1.1PT-2,5/8	2,5	8	D1-А3	730	7,5	300
1.1PT-32	2,5-4,0	6,3	D1	-	-	100
1.1PT-4/6,3	4	6,3	D1-А3	730	11	320
1.2PT-1(2)-12	0,25-0,5	16-100	L	-	-
1.2Т-2-12	0,25-0,5	16-100	L	-	-
1.2PT-1(2)-12-Q/P	0,25-0,5	16-100	А	730-1470	3-18,5
1.2Т-2-12-Q/P	0,25-0,5	16-100	B	730-1470	3-18,5
1.2PT-1(2)-16	0,5-1,0	20-63	L	-	-	275
1.2Т-2-16	0,5-1,0	20-63	L	-	-	280
1.2PT-1(2)-16-Q/P	0,5-1,0	20-63	А	730-1470	5,5-30
1.2Т-2-16-Q/P	0,5-1,0	20-63	B	730-1470	5,5-30
1.2PT-3-16-1,25/40	1,25	40	B	730	30	635
1.2PT-1(2,3)-25	1,25-2,5	8-25	L	-		275
1.2Т-2-25	1,25-2,5	8-25	L	-		280
1.2PT-1(2)-25-Q/P	1,25-2,5	8-25	А	730-1470	7,5-22
1.2Т-2-25-Q/P	1,25-2,5	8-25	А	730-1470	7,5-22
1.2PT-3-25-3,2/16	3,2	16	B	730	22	635
1.2PT-1-25-1,25/25	1,25	25	А	730	11	550
1.2PT-1-25-1,6/20	1,6	20	А	970	11	525
1.2PT-2-25-1,6/25	1,6	25	А	970	15	550
1.2PT-2-25-2,5/16	2,5	16	А	1470	15	520
1.2Т-2-25-1,25/25	1,25	25	B	730	11	560
1.2Т-2-25-1,6/20	1,6	20	B	970	11	535
1.2Т-2-25-1,6/25	1,6	25	B	970	15	560
1.2Т-2-25-2,5/16	2,5	16	B	1470	15	560
1.2PT-1(2)-36	3,2-5,0	1,6-12,5	L	-	-	310
1.2Т-2-36	3,2-5,0	1,6-12,5	L	-	-	350
1.2PT-1(2)-36-Q/P	3,2-5,0	1,6-12,5	А	730-1470	3-22
1.2Т-2-36-Q/P	3,2-5,0	1,6-12,5	B	730-1470	3-22
1.2PT-1-36-2,5/10	2,5	10	А	730	11	580
1.2PT-1-36-3,2/8	3,2	8	А	970	11	560
1.2PT-1-36-4/6,3	4	6,3	А	970	11	560
1.2PT-1-36-4/10	4	10	А	970	15	585
1.2PT-2-36-5/10	5	10	А	1470	18,5	590
1.2Т-2-36-2,5/10	2,5	10	B	730	11	595
1.2Т-2-36-3,2/8	3,2	8	B	970	11	590
1.2Т-2-36-4/6,3	4	6,3	B	1470	11	555
1.2Т-2-36-4/10	4	10	B	1470	15	590
1.2Т-2-36-5/10	5	10	B	1470	18,5	590
1.2PT-1(2)-45	5-8	1-8	L	-	-	310
1.2Т-2-45	5-8	1-8	L	-	-	350
1.2PT-1(2)-45-Q/P	5-8	1-8	А	970-1470	3-22
1.2Т-2-45-Q/P	5-8	1-8	B	970-1470	3-22
1.2PT-1(2)-55	8,0-12,5	0,63-5,0	L	-	-	310
1.2Т-2-55	8,0-12,5	0,63-5,0	L	-	-	350
1.2PT-1(2)-55-Q/P	8,0-12,5	0,63-5,0	В	970-1470	3-22
1.2Т-2-55-Q/P	8,0-12,5	0,63-5,0	G	970-1470	3-22
1.2PT-1-55-8/4	8	4	В	970	11	560
1.2PT-1-55-10/4	10	4	В	970	15	585
1.2PT-2-55-12,5/2,5	12,5	2,5	В	1470	11	530
1.2PT-2-55-12,5/3,2	12,5	3,2	В	1470	15	560
1.2Т-2-55-8/5	8	5	G	970	15	590
1.2Т-2-55-10/4	10	4	G	1470	15	590
1.2Т-2-55-12,5/2,5	12,5	2,5	G	1470	11	550
1.2Т-2-55-12,5/3,2	12,5	3,2	G	1470	15	590
1.3Т-20-2,7	0,8-2,0	32-100	D2	-	-	700
1.3Т-1/100	1	100	D2-А3	730	37	1300
1.3Т-2/100	2	100	D2-А3	1470	75	1350
1.3Т-20-3,6	0,8-1,6	32-100	D2	-	-	700
1.3Т-0,8/80	0,8	80	D2-А3	730	30	1230
1.3Т-28-2,9	2-4	16-63	D2	-	-	730
1.3Т-2/16	2	63	D2-А3	730	45	1410
1.3Т-4/32	4	32	D2-А3	1470	45	1300
1.3Т-4/63	4	63	D2-А3	1470	90	1470
1.3Т-28-3,1	2-4	16-63	D2	-	-	720
1.3Т-2,5/25	2,5	25	D2-А3; D2В3	970	22	1080
1.3Т-2,5/40	2,5	40	D2-А3	970	37	1250
1.3Т-2,5/50	2,5	50	D2-А3	970	45	1320
1.3Т-28-3,6	1,6-3,2	16-63	D2	-	-	720
1.3Т-3,2/16	3,2	16	D2-А3; D2-В3	1470	22	1050
1.3Т-32-2,7	3-6	50	D2; К2	-	-	730
1.3Т-6/50	6	50	D2-А3; К2-В3	1470	90	1470
1.3Т-32-3,1	2,5-5,0	40	D2; К2	-	-	720
1.3Т-3,2/40	3,2	40	D2-А3; К2-В3	970	45	1310
1.3Т-32-3,6	2-4	25	D2; К2	-	-	720
1.3Т-4/25	4	25	D2-А3; К2-В3	1470	37	1060
1.3Т-40-2,9	4-8	10-32	D2	-	-	730
1.3Т-8/32	8	32	D2-А3	1470	90	1470
1.3Т-40-3,6	2,7-6,3		D1; D2; К2			720
1.3Т-6,3/16	6,3	16	D1-А3; К2-А3	1470	45	1200
1.3Т-6,3/20	6,3	20	Е	1470	55	1270
1.3Т-45-3	5-10	20	D1; D2	-	-	720
1.3Т-10/20	10	20	D2-А3; D2-В3	1470	75	1420
1.3PT-50	8-16	6,3-16,0	D1; D2; К2	-	-	660
1.3Т-50-3	6,3-12,5	10-16	D1; D2	-	-	720
1.3Т-12,5/10	12,5	10	Е	1470	55	1280
1.3Т-12,5/16	12,5	16	Е	1470	75	1420
1.3Т-16/8	16	8	D1-А3	1470	45	1290
1.3Т-16/16	16	16	Е	1470	90	1470
1.3Т-63-2,9	10-20	1,2-10,0	D1; D2	-	-	780
1.3Т-20/3	20	3	D1-А3; D2-А3	1470	22	1100
1.3Т-20/10	20	10	Е	1470	75	1450
1.3Т-70-2,9	12,5-25,0	1-8	D2	-	-	780
1.3Т-25/8	25	8	D2-А3	1470	75	1450
2.3PT-20	0,8-1,0	32-40	ZH	-	-	355
2.3PT-0,8/32	0,8	32	Z I	730 970	11 15	650 750
2.3PT-1/40	1	40	Z I	970 1470	15 18,5	650 750
2.3PT-25	1,25-1,60	20-25	ZH	-	-	355
2.3PT-1,25/20	1,25	20	Z I	730 970	11 15	650 750
2.3PT-1,6/25	1,6	25	Z I	970 1470	15 18,5	650 750
2.3PT-28	1,6-2,5	16	ZH	-	-	355
2.3PT-1,6/16	1,6	16	Z I	730 970	11 15	650 750
2.3PT-2,5/16	2,5	16	Z I	970 1470	15 18,5	650 750
2.3PT-36	2,5-4,0	10	ZH	-	-	370
2.3PT-2,5/10	2,5	10	Z I	730 970	11 15	670 770
2.3PT-4/10	4	10	Z I	970 1470	15 18,5	670 750
2.3PT-45	4,0-6,3	6,3	ZH	-	-	370
2.3PT-4/6,3	4	6,3	Z I	730 970	11 15	670 770
2.3PT-6,3/6,3	6,3	6,3	Z I	970 1470	15 18,5	670 750
2.3PT-55	6,3-10,0	4	ZH	-	-	380
2.3PT-6,3/4	6,3	4	Z I	730 970	11 15	670 770
2.3PT-10/4	10	4	Z I	970 1470	15 18,5	670 770
2.3PT-63	8,0-12,5	2,5-3,2	ZH	-	-	380
2.3PT-8/3,2	8	3,2	Z I	730 970	11 15	670 770
2.3PT-12,5/2,5	12,5	2,5	Z I	970 1470	15 18,5	670 750
УН 2/63	2	63	D2-А3	970	45	1500
УН 4/32	4	32	D2-А3	1470	45	1300
УН 4/63	4	63	D2-А3	1470	90	1560
УН 8/32	8	32	D2-А3	1470	90	1560
UNP 4/63	4	63	D2-А3	1470	90	1720
UPG 6/10	6	10	D1-А3	730	22	1500

* Weight is for units with common industrial execution engine.

A performance-D1.1-A1; D1.2-A1; D2.2-A1; K2.2-A1; D1.1-B1; D1.2-B1; D2.2-B1; K2.2-B1.

B-D1.1-performance A3; D1.2-A3; D2.2-A3; K2.2-A3; D1.1-B3; D1.2-B3; D2.2-B3; K2.2-B3.

The performance-D1.2-A1; D2.2-A1; K2.2-A1; D1.2-B1; D2.2-B1; K2.2-B1.

T-D1.2-performance A3; D2.2-A3; K2.2-A3; D1.2-B3; D2.2-B3; K2.2-B3.

E-D1-performance A3; A2-A3; D1-B3; D2-B3.

D1 M-fulfillment; D 2; K2; D4; K4.

H-D1-A1 execution; A2 A1; A1-K2; D1-B1; A2-B1; B1-K2; D4-A1; K4-A1; D4-B1; K4-B1.

And performance-D1-B2; A2-B2; B2-R2; D4-B2; K4-B2.

D1.1 L-fulfillment; D1.2; D2.2; K2.2.

Tel./fax.: +380 (542)63-53-28, Cell: +380 (99) 116-06-80, +380 (68)923-77-76
E-mail: snm-2008@ukr.net, snmmash@gmail.com, Skype: Soyuznasosmash Equipment